Heavy hammer crusher is a new type of crushing equipment, mainly composed of the rotor, grate, spindle, hammerhead, etc. Heavy hammer crusher removes the initial crushing process like jaw crusher, it is suitable for crushing all kinds of medium hardness material and brittle material, mainly used in cement, building materials, mining and other industries, heavy hammer crusher can be called an excellent stone breaking tool. Along with the development of the industry, the old crushing equipment can't meet the production requirements, so Henan  FTM Machinery(miningftm.com) introducing the advanced technology and combining with actual production conditions, after the repeated tests and changes, develops the more advanced crushing equipment---PCZ heavy hammer crusher.

PCZ heavy hammer crusher performance

·The finished products can be once-formed in this equipment, without secondary crushing, which can reduce the cost by about 40%, reduce energy consumption and lower production costs.

·The larger crushing cavity of PCZ heavy hammer crusher has a capacity of handling the plenty of materials, which can achieve the purpose of double crushing and high-efficiency production, and improve the working efficiency.

·In the lower part of the rotor, there is a sieve plate, those materials which are smaller than the size of the sieve hole will be discharged, and the coarse-grained materials larger than the size of the sieve hole are left to continue being crushed and ground until they can be eliminated through the sieve plate. The size of the finished product is suitable and even, without excessive grinding and waste.

Notes on the use of PCZ heavy hammer crusher

Installation

The PCZ heavy hammer crusher should be installed on the concrete base, in the middle of the equipment and concrete base should be applied the cushioning material to avoid the vibration impact during the PCZ heavy hammer crusher work.

Operation

After the machine starts to operate normally, the raw material can be put into the machine, and must be uniformly added and distributed on the whole length of the rotor working part to prevent the sudden increase of the motor load and affect the operation of the machine.

Maintenance

Repair the machine and lubricate the bearing and rotor regularly. Change the lubricating oil every three months at least and wash the bearing carefully with the clean gasoline.